manualshive.com logo in svg

Crestron CEN-NVS200, Руководство по эксплуатации и установке

Поделиться
Скачать
Crestron CEN-NVS200 Скачать руководство пользователя страница 22

Network Video Streamer 

 

Crestron 

CEN-NVS200

 

NOTE:

  If the default HTTP port number of 80 has been changed, you must 

append the port number to the IP address by entering a colon followed by 
the new port number. If, for example, the IP address is 192.168.10.225 and 
the HTTP port number has been changed from 80 to 150, enter 
http://192.168.10.225:150. 
 
For information about changing the HTTP port number, refer to 
“Configuring Network Settings” which starts on page 32. 

3.  If necessary, perform either of the following: 

• 

For initial access to the CEN-NVS200 using Internet Explorer, you 
may be prompted for permission to install a new plug-in for the  
CEN-NVS200. Click 

Yes

 to proceed. If Internet Explorer does not 

allow you to continue installation of the plug-in, check the Internet 
security option and lower the security levels or contact your IT or 
networking supervisor for assistance. The plug-in must be installed to 
display the video in the Web browser. 

NOTE:

  The Internet Explorer request to install a plug-in for the  

CEN-NVS200 depends on the Internet security settings of your PC. If 
the highest security level is set, the PC may prohibit any installation 
and execution attempt. 

• 

For initial access to the CEN-NVS200 using Firefox, install the 
QuickTime

®

 media player. 

The user name and password window will open, allowing you to log in to the  
CEN-NVS200. Refer to “Logging In to the CEN-NVS200” on page 19 for  
log-in information. 

Using Crestron ToolBox 

NOTE:

  To be able to use Crestron Toolbox to access the CEN-NVS200, the UPnP 

(Universal Plug and Play) Ethernet protocol configuration setting of the  
CEN-NVS200 must be enabled. The UPnP protocol is enabled by default. For 
additional information, refer to “Configuring Network Settings” which starts on page 
32. 

To access the CEN-NVS200 from Crestron Toolbox: 

1.  Open Crestron Toolbox. 

2. From 

the 

Tools

 menu, select 

Device Discovery Tool

. 

NOTE:

  You can also access the Device Discovery Tool by clicking the 

Device Discovery Tool button (

) in the toolbar. 

NOTE:

  The security software running on your computer may send you a 

program alert regarding the attempt of Crestron Toolbox to connect to the 
network. You must allow the connection so the Device Discovery tool can 
be used. 

3.  From the device list on the left-hand side of the screen, select the UPnP 

name of the CEN-NVS200. The default UPnP name is CEN-NVS200. 

18  

•

  Network Video Streamer: CEN-NVS200 

Operations & Installation Guide – DOC. 7111A 

Содержание CEN-NVS200





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды