Crestron C2N-SSC-2, Руководство по эксплуатации и установке

Страница: 20 / 44

ILT Shade Controller Crestron C2N-SSC-2
16
•
ILT Shade Controller: C2N-SSC-2 Operations & Installation Guide - DOC. 6318
Reversing the Direction of Travel for a Shade
Whether a shade rolls up or down when a particular button is pushed
depends on the orientation of the shade during installation as well as how
the shade material is mounted to the cylinder. If the installer finds that the
shade moves opposite to the direction required, the direction of travel can
be reversed as follows:
For shade 1, verify that the unit is not in limit-setting mode (SETUP LED
is not illuminated), and then press and hold the up (
K
) button for at least
10 seconds. The SETUP LED will give a confirming flash. The direction
of travel for shade 1 has now been reversed.
For shade 2, verify that the unit is not in limit-setting mode (SETUP LED
is not illuminated), and then press and hold the down (
j
) button for at
least 10 seconds. The SETUP LED will give a confirming flash. The
direction of travel for shade 2 has now been reversed.
NOTE: Perform shade reversals on one shade at a time.
NOTE: After a reversal, it is necessary to re-adjust the limits since the
reversal process again pinches the upper and lower limits together so that
the shade cannot move.
Programming Software
Have a question or comment about Crestron software?
Answers to frequently asked questions (FAQs) can be viewed in the
Online Help section of the Crestron website (www.crestron.com). Log in
at
http://www.crestron.com/accounts/login.asp to post your own question
or view questions you have submitted to Crestron’s True Blue Support.
First-time users will need to establish a user account.