Crestron C2N-IRGW-1G Скачать руководство пользователя страница 19

Страница: 19 / 28

Crestron

C2N-IRGW-1G & C2N-IRGW-F

Gateway

Programming with SIMPL Windows

NOTE:

While SIMPL Windows can be used to program the C2N-IRGW-1G and

C2N-IRGW-F, it is recommended to use Crestron D3 Pro or SystemBuilder for
configuring a system.

SIMPL Windows is Crestron’s premier software for programming Crestron control
systems. It is organized into two separate, but equally important “Managers”.

Configuration Manager

Configuration Manager is the view where programmers “build” a Crestron control
system by selecting hardware from the

Device Library

•

To incorporate the C2N-IRGW-1G or C2N-IRGW-F into the system, drag
the C2N-IRGW from the Wireless Receivers | Wireless Receivers (IR)
folder of the

Device Library

and drop it in the

System Views.

Locating the C2N-IRGW in the Device Library

•

The system tree of the control system displays the device in the appropriate
slot with a default Net ID as shown in the following illustration.

C2Net Device, Slot 9

•

Additional C2N-IRGW-1G and C2N-IRGW-F devices are assigned
different Net ID numbers as they are added.

•

If necessary, double click a device to open the “Device Settings” window
and change the Net ID as shown in the following figure.

Operations & Installation Guide – DOC. 6468A

IR Gateway: C2N-IRGW-1G & C2N-IRGW-F

•

Содержание C2N-IRGW-1G





























Результаты поиска

Содержание C2N-IRGW-1G

Отзывы:

Похожие инструкции для C2N-IRGW-1G

Бренды по названию

Популярные бренды

Crestron C2N-IRGW-1G, Руководство по эксплуатации и установке

Результаты поиска

Содержание C2N-IRGW-1G

Отзывы:

Похожие инструкции для C2N-IRGW-1G

Бренды по названию

Популярные бренды