8x8 DigitalMedia™ Switcher
Crestron
DM-MD8X8
Uploading and Upgrading
Crestron recommends using the latest programming software and that each device
contains the latest firmware to take advantage of the most recently released features.
However, before attempting to upload or upgrade it is necessary to establish
communication. Once communication has been established, files (for example,
programs or firmware) can be transferred to the control system (and/or device).
Finally, program checks can be performed (such as changing the device ID or
creating an IP table) to ensure proper functioning.
Establishing Communication
Use Crestron Toolbox for communicating with the DM-MD8X8; refer to the
Crestron Toolbox help file for details. There are two methods of communication.
USB
NOTE:
Required for initial setup of Ethernet parameters.
USB Communication
USB
PC RUNNING
CRESTRON TOOLBOX
DM-MD8X8
•
The
COMPUTER
port on the DM-MD8X8 connects to the USB port on
the PC via the included Type A to Type B USB cable.
•
Use the Address Book in Crestron Toolbox to create an entry using the
expected communication protocol (USB). When multiple USB devices are
connected, identify the DM-MD8X8 by entering “DM-MD8X8” in the
Model
textbox, the unit’s serial number in the
Serial
textbox or the unit’s
hostname in the
Hostname
textbox. The hostname can be found in the
“System Info” window in the section marked
Ethernet
however,
communications must be established in order to see this information in the
“System Info” window.
•
Display the DM-MD8X8’s “System Info” window (click the
icon);
communications are confirmed when the device information is displayed.
TCP/IP
NOTE:
Required for operation with a Crestron control system. This NOTE is
only
applicable to devices that use TCP/IP to communicate with a control system (and of
course, is not applicable to devices that
are
control systems).
Ethernet Communication
ETHERNET
PC RUNNING
CRESTRON TOOLBOX
DM-MD8X8
•
Establish serial / USB / wireless communication between DM-MD8X8 and
PC.
50
•
8x8 DigitalMedia™ Switcher: DM-MD8X8
Operations Guide – DOC. 6755A
