Crestron 3 Series Скачать руководство пользователя страница 32

Страница: 32 / 68

•

3-Series Control Systems

Reference Guide – DOC. 7150B

Firmware Updates

To take advantage of all the latest device features, the control system should

always contain the latest firmware, which is available for download at

www.crestron.com/Support

NOTE:

Access to firmware is reserved for Authorized Crestron dealers, Crestron

Service Providers (CSPs), and Crestron partners only. New users must register

for an account to access certain areas of the Crestron website. For more

information on registering, navigate to

https://www.crestron.com/register

To perform a firmware update:

Download the latest device firmware (.puf file) at

www.crestron.com/Support

Use an SFTP client to transfer the firmware .puf file to the control

system's /firmware directory.

Issue the

PUF <filename>

command in the control system console, where

is the complete filename of the .puf file.

NOTE:

Firmware updates can be scheduled using the control system’s auto

update mechanism. For more information, refer to “Auto Update Mechanism” on

page 46.

The Package Update Tool in Crestron Toolbox can also be used to send firmware

to the control system and to manage the firmware update. For more

information, refer to the Crestron Toolbox help file.

Содержание 3 Series





































































Результаты поиска

Содержание 3 Series

Отзывы:

Бренды по названию

Популярные бренды

Crestron 3 Series, Справочное руководство

Результаты поиска

Содержание 3 Series

Отзывы:

Бренды по названию

Популярные бренды