Crestron Electronics TS-1070, Руководство по эксплуатации продукта, Страница: 145 / 166

Product Manual — Doc. 8555E TS-70 Series • 141
Settings Tab - Control System
If the control system has authentication enabled, its username and password must be entered in
the Security tab. For more information, refer to
Security (below) .
l
IP Table: Set an IP table connection between the touch screen and control system:
o
IP ID: Enter an IP ID for connecting the touch screen to the control system.
o
IP Address/Hostname: Enter the control system IP address or hostname.
o
Room ID: Enter a room ID to associate with the touch screen (for connections with
the Crestron Virtual Control server-based control system)
NOTE: For more information on connecting the touch screen to Crestron Virtual Control,
refer to the help file in the Crestron Virtual Control web configuration interface. To
access the help file, click the question mark button on the top left of the page.
Security
Click the Security tab on the top left of the configuration interface to display selections for
configuring security and authentication settings for the touch screen.