Crestron Electronics TS-1070, Руководство по эксплуатации продукта

Страница: 121 / 166

Product Manual — Doc. 8555E TS-70 Series • 117
Web Configuration
The touch screen may be monitored and configured using the included web configuration
interface. The configuration interface is accessible from a web browser if the touch screen IP
address is known.
The web configuration interface is also accessible through the XiO Cloud® service. For more
information, refer to
Connect to XiO Cloud Service (on page 157) .
To access the configuration interface:
1. Use the Device Discovery tool in Crestron Toolbox™ software to discover the touch screen
and its IP address on the network.
2. Open a web browser.
3. Enter the touch screen IP address into the browser URL field. The configuration interface
is displayed (TS-1070 shown).
NOTE: If authentication is enabled for the touch screen, an administrator username and
password must be entered prior to accessing the web configuration interface. For more
information on configuring authentication settings, refer to
Authentication (on
page 142) .
Web Configuration Interface
The configuration interface provides the following tabs:
l
Status: Used to monitor touch screen status
l
Settings: Used to configure touch screen settings
l
Security: Used to enable authentication and other security settings