5925 Heisley Road • Mentor, OH 44060-1833
Carving
Station
FL-2205
Rev. 4 (7/06)
Page 1 of 2
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
OPERATING and MAINTENANCE INSTRUCTIONS
Model: CSH-121-10 Series, 120 and 240 Volt
HOW TO OPERATE UNIT:
Plug cord into proper wall outlet.
Push thermostat switch
“ON”
and turn thermostat
to no. 10.
Preheat for 30 minutes; then add cutting board
and/or pans to the heated base.
Push lamp switch to
“ON”
for additional heat.
NOTE:
Proper food holding temperature is 140°F
(60°C) or higher.
For uncovered pans or product:
Leave thermostat on no. 10 setting.
For covered pans or product:
Turn the thermostat to no. 6 setting.
5. Push switches and turn thermostat
“OFF”
when
done.
1.
2.
3.
4.
CLEANING INSTRUCTIONS:
Remove power cord from wall outlet.
DO NOT immerse unit in water.
DO NOT get water on controls.
DO NOT use abrasives or harsh
chemicals.
Wipe cooled exterior with a damp cloth.
1.
2.
3.
4.
5.
0848-063
THERMOSTAT KNOB
0595-002
THERMOSTAT BEZEL
OFF
6
3
4
5
2
1
8
7
10
9
SWITCH
OFF/ON SWITCH
THERMOSTAT
IFW HOOD OFF/ON
ELECTRICAL SPECIFICATIONS:
Model No.
Volts
Watts
Amps
Hertz
Phase
NEMA
Service
CSH-121-10
120
550
4.6
60
1
5-15
15 AMP
CSH-121-10
240
575
2.4
60
1
6-15
15 AMP
REPLACEMENT PARTS:
(Also see wiring diagrams)
Lamp, Red (250 Watts) ................................ 0820-001
Lamp, White (250 Watts) ............................. 0820-033
Lamp, Red (275 Watts/240 Volts) ................ 0820-014
Cutting Board ............................................... 1004-019
Socket ........................................................... 0822-037
