Creo Dolev 4press V, Руководство пользователя

Страница: 68 / 121

52 Chapter 2 – Handling Cassettes and Media
Media Info window
The Media Info window shows the parameters of the Media Info table of
the currently loaded film (the square brackets enclose the default value of
the field).
The system uses this data to inform you of the status of the cassettes during
exposure. Therefore, each time you load film, you need to check the values
in the table, and modify them to suit the film you loaded.
To update a parameter:
1.
Press the soft button below
Toggle
. This switches between available
options.
2.
When you wish to confirm the values and exit, press the soft button
below
Done
.
A First Feed is performed and the new film is loaded into the
imagesetter drum. When the imagesetter completes the first load, a
STANDBY message is displayed on the control panel. (For further
information on the soft buttons, see
Control Panel Functionality on
page 55
).
Media Info window fields
Material
- [Toggle field; default is
Film
]
Toggle this field to
Film
(the default),
Plate
, or
Paper
, according to the
media you loaded.
Media Thickness
- [toggle field; default is
4
(mil)]
Toggle this field to
4 mil
(the default) or
7 mil
, according to the media you
loaded.
Media Width
- [toggle field; default is
254
(mm)]
Toggle this field to the width of the media you loaded.
Material^ >Film [Film]
Media Thickness^ 4 [4mil]
Media Width^ 254 [254]
Media Position^ Punch [Punch]
Res/Int Table #^ D [D]
Vendor^ None [None]
Cur. Length (m)^ 61 [61]