Creo Dolev 4press V, Руководство пользователя

Страница: 20 / 121

4 Safety Precautions
7.
Grasp the selector and pull it straight out. Note that voltage settings
are printed on each of its four (4) posts. The appropriate voltage
setting for the imagesetter should face outward for viewing through
the fuse holder window.
8.
Rotate the voltage selector until the required voltage setting faces
outward for viewing through the fuse holder window (refer to the
table above for the correct setting).
9. Reinsert the voltage selector into the electronic power drawer
assembly.
10.
Push the selector slightly to ensure that it is completely inserted.
11.
Replace the fuse holder in the unit. When properly seated, the holder
will snap into place with only slight finger pressure.
12.
Verify that the appropriate voltage setting appears in the window.
Selecting the Power Supply Cord
The Dolev 4press V/V
2
is supplied without a power supply cord.
Ø
Select one of the following:
•
In the United States and Canada -
Use a UL-listed/CSA-certified cord set that includes a flexible cord
of type SJ, SJE, SJO, SJOO, SJT, SJTO, SJTOO, S, SE, SO, SOO, ST,
Selected
Voltage
Faces
Outward
220
120