Creo Dolev 4press V, Руководство пользователя

Страница: 114 / 121

98 Chapter 5 – Media Related Troubleshooting
End of Film
When the roll of film is finished, the following message appears on the
control panel:
[ W ]
Film End
During First Load or during Advance - 1st Stage
- The piece of film that
is already in the drum/carriage automatically rolls back into the loading
cassette (or into the film loading drawer), and the Film loading drawer
opens.
Ø
Remove the film from the loading cassette/film loading drawer and
dispose of it.
During Advance-2nd Stage
- Since the film is already grasped by the
unloading/acc. cassette, the system automatically unloads the rest of the
film into the unloading/acc. cassette, and opens the Film unloading
drawer.
Ø
Remove the unloading/acc. cassette and process the film.
After Removing the Unloading/Accumulating Cassette
After removing the unloading/acc. cassette, the edge of the film may fall
into the cassette (it no longer sticks out of the cassette).
Perform the following in a dark room:
1.
Lift each of the clasps located on the cover of the unloading/acc.
cassette, and turn it counter-clockwise to unscrew.
2.
Pull the cover upward and remove it.
3.
Grasp the film and pull some of it out.
4.
Process the film and replace the cover of the unloading/acc. cassette.