ODC XR 9
OUTDOOR DISCOVERY CRAFT
ASSEMBLY INSTRUCTIONS
alUMinUM FRaMe
(1) Left Frame Member
(1) Right Frame Member
(1) Seat Support Frame Member with Underseat Lift and Lock Anchor System Attached
(2) Foot Bars
(8) Short Snap Pins
(1) Side Storage Pocket
(1) Cargo Deck with Motor Mount (with protective bar for shipping attached)
(1) Anchor Line Storage Bag
(1) Rod Holder
(1) Plastic Padded Seat Back
(1) Plastic Padded Seat Bottom
(4) Seat Screws
(2) Seat Assembly Pins
POntOOns
(1) Pair pontoons: Each pontoon consists of
30 oz. PVC thermal welded cover with integral side
storage pockets, 420 denier nylon liner and 30 gauge
PVC bladder with valve insert
and valve plate all pre-assembled.
(8) Cam-lock straps
(1)
PUMP
Complete with a set of adapters
OaRs & OaRlOCks
(1) Pair 7 foot, 3 piece oars
(1) Pair bronze oarlocks, with split rings
(1) Pair Oar Stops
(2) Oarlock Bushings
WaRRantY CaRD & PatCh kit
stRiPPing aPROn
TM
TM
Your ODC XR 9 Pontoon Boat comes in two separate cartons consisting of the following parts:
XR 9-2009:new odc 1018 revised 2/17/10 9:11 AM Page 1
