Copyright © 2010-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree
®
, the Cree logo and XLamp
®
are registered trademarks of Cree, Inc.This
document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,
please contact Cree Sales at [email protected]. Other trademarks, product and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement,
sponsorship or association.
7
XLamp
®
mX FamiLy LED SoLDEring & HanDLing
If an environment of <60% RH is not available for storage, XLamp MX Family LEDs should be baked (described above) before reflow
soldering.
LoW tEMpEraturE opEratIon
The minimum operating temperature of these XLamp LED components is -40 °C. To maximize lifetime, Cree recommends avoiding
applications where the lamps are cycled on and off more than 10,000 cycles at temperatures below 0 °C.
