Copyright © 2010-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree
®
, the Cree logo and XLamp
®
are registered trademarks of Cree, Inc.This
document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,
please contact Cree Sales at [email protected]. Other trademarks, product and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement,
sponsorship or association.
10
XLamp
®
mX FamiLy LED SoLDEring & HanDLing
assEMbLy storagE & HanDLIng
Do not stack PCBs or assemblies containing XLamp MX Family of LeDs. PCBs or assemblies containing XLamp MX Family of LeDs
should be stacked in a way to allow at least 1-cm clearance.
Do not use bubble wrap directly on top of XLamp MX Family of LeDs. Force from the bubble wrap can potentially damage the LeD.
P
CorrECt
X
Wrong
P
CorrECt
