ASSEMBLY STORAGE & HANDLING
Do not stack PCBs or assemblies containing XLamp ML family LEDs. PCBs or assemblies containing XLamp ML family LEDs should be
stacked in a way to allow at least 1-cm clearance.
Do not use bubble wrap directly on top of XLamp ML family LEDs. Force from the bubble wrap can potentially damage the LED.
P
CORRECT
P
CORRECT
X
WRONG
XLAMP
®
ML FAMILY LED SOLDERING & HANDLING
© 2010-2021 Cree LED. The information in this document is subject to change without notice. Cree
®
and the Cree logo are registered trademarks, and
the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp
®
is a registered trademark of Cree LED. Other trademarks, product and company names
are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. This document
is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available
at www.cree-led.com.
CLD-AP50
REV 10
10