
6
Technical
Technical
Technical
Technical Parameter
Parameter
Parameter
Parameter
Diagram
Diagram
Diagram
Diagram
Setting ID for conference units:
1.
The ID setting for conference units means that, every conference unit in the system (including
interpretation & speech unit) was given the only address for being discerned by the host.
2.
setting the conference units as following: after connection finished, turn on the host power, and set
the ‘SET ID’ to ‘ON’, and press speech of the speech & interpretation unit one by one, the light of MIC
will be on, until all the lights are on, we could set the ‘SET ID’ to ‘OFF’, when all the lights of MIC are off,
the system will work under the normal mode
Technical Parameter
CR-M4101
CR-ME4000
Power supply
100-240V
100-240V
Static consumption
10W
10W
Nominal
power
consumption
350W
350W
Output power
≤110W/24V
≤110W/24V
Audio output
Impedance:100Ω
mode:unbalanced
Impedance:100Ω
mode:unbalanced
MIC input
Impedance:100kΩ
Electriclevel:-60dB
mode:unbalanced
Impedance:100kΩ
Electriclevel:-60dB
mode:unbalanced
Frequency response
60
-
8kHz
60
-
8kHz
(S/N)
> 80dB
> 80dB
Harmonic distortion
< 0.5%
< 0.5%
Harmonic distortion at overload
<1%
<1%
Crosstalk attenuation at 1kHz
>50dB
>50dB
Weight
6.5KG
6KG
Dimension
483L *275W *88H (mm)
483L * 275W *88H (mm)
Colour
Grey
Grey