Creative Sound Blaster Audigy non-SB1394, Руководство пользователя

Страница: 52 / 71

General Specifications A-4
❑
Stereo headphone (32-ohm load) support on Front Line-Out
SB1394 Interfaces
❑
One 2 x 5 pin Internal SB1394 connector (J6) on card for connection to the Audigy
Extension card (with Audigy Drive upgrade option available only on some models)
❑
One 6-pin SB1394 connector/port on rear bracket
Interfaces ❑
VOL_CTRL 1 x 4 pin header
❑
PC_SPK (PC speaker) 1 x 2 pin header
❑
AUD_EXT 2 x 20 pin header for connection to Audigy Drive (upgrade option,
available only on some models)
❑
JOYSTICK 2 x 8 pin header for connection to the Joystick/MIDI connector
(optional attachment: metal bracket bundled with some models)
Sound Blaster
Audigy (non-
SB1394) card
Audio Inputs
❑
One line-level analog Line input via stereo jack on rear bracket
❑
One mono Microphone analog input via stereo jack on rear bracket
❑
CD_IN line-level analog input via 4-pin Molex connector on card
❑
AUX_IN line-level analog input via 4-pin Molex connector on card
The 6-pin SB1394
connector/port has a 2 watt
maximum power output.
Connect only one high power
usage device such as the
IEEE 1394 hard disk and CD-
RW drive to this port unless
it is self-powered.