Installing Hardware 2-11
Connecting
External
Consumer
Devices
Dolby Digital Decoder/Amplifier
Sound Blaster Audigy card
Connects to
the Audigy
Extension
card.
3.5mm(mono)-to-
RCA cable
Analog Front,
Rear and
Center/ Sub
Inputs
3 pairs of 3.5 mm
(stereo)-to-RCA
cable
Dolby Digital (AC-3)
SPDIF In
Discrete 6-channel Amplifier
Additional information for advanced users:
For connection to Center and Subwoofer
channels using a 3.5mm (stereo)-to-RCA
cable, connect the white RCA jack to the
Center input and the red RCA jack to the
Subwoofer input of the amplifier.
Tip : Left / Center channel
Ring : Right / Subwoofer channel
Figure 2-11: Connecting external consumer electronic devices to the Sound Blaster Audigy card.
Rear Out
Line Out
Analog/Digital Out jack
Содержание Platinum eX
Страница 13: ...Introduction ...
Страница 26: ...2 Installing Hardware This chapter tells you how to install the Sound Blaster Audigy Platinum eX hardware ...
Страница 38: ...3Installing Software This chapter tells you how to install the Sound Blaster Audigy Platinum eX software ...
Страница 43: ...4Sound Blaster Audigy Applications This chapter tells you how to get the most out of your Sound Blaster Audigy ...