Creative PC-CAM 880, Руководство пользователя, Страница: 29 / 54

Using Creative PC-CAM 880 as a Digital Camera 2-4
Recording a
Video 1. Be sure that your camera is not connected to your computer, and that you have inserted new batteries
into your camera.
2. Turn on your camera, which is in Camera mode by default.
3. Press the Enter key on your Multi-selector button.
The Onscreen Display (OSD) menu appears on the LCD monitor.
4. Press the Enter key on your Multi-selector button.
The
Operation mode setting icons are displayed.
5. Press the Down key on your Multi-selector button once, and then press the Enter key to select the
Video Clip icon.
The Video Clip operation mode is enabled.
6. Point your camera at your subject and press the Snap button to begin recording.
7. Release the Snap button to stop recording.
Note: The Snap button is disabled when your camera’s memory is full.
8. Press the Mode button to switch to Playback Mode. The LCD monitor displays the video you have
taken.
Note: Use the Down key on your Multi-selector button and locate videos and photos on the LCD
monitor.
Up Key
Down Key
Left Key
Right Key
Enter key
Figure 2-2: Multi-selector button.