Creative 51MF5045AA000 - Travelsound 250 Speaker System, Руководство по началу работы

Страница: 36 / 61

Using Creative TravelSound MP3 5-2
Playback Mode
You can use the three playback modes to change how your player plays back
tracks.
Setting playback
modes
Slide the switch to the desired position to select a playback mode.
• In Normal mode, playback ends at the last track.
• In Repeat All mode, your player plays all the tracks before repeating them.
Playback continues until you press the Stop button.
• In Random mode, your player plays back tracks at random.
Playback continues until you press the Stop button, until all the tracks have
been played.
Voice Mode
In Voice mode, you can create and play back voice or audio recordings.
Press the Forward and Reverse buttons simultaneously to switch between Player
and Voice modes. For more information on switching between modes, refer to
“Player LED Indicators” on page 1-7.
The blue and orange LED indicators light up to show that your player is in Voice
mode.
Making a voice
recording
Make sure that your player is placed as close as possible to the recording source.
1. Press and hold the
Stop button to start recording.
The blue and orange LED indicators blink while you record.
2. Press the Stop button to stop recording.
The blue and orange LED indicators stop blinking when you stop recording.
The recorded audio is stored in your player’s internal memory as a .WAV file, in the
directory E:\VOICE (where E:\ is the drive letter of your internal memory).
Recorded audio cannot be stored in the removable memory (SmartMedia Memory
card).
Normal
Random
Repeat All
If the internal memory
reaches capacity, the
blue and orange LED
indicators blink
rapidly, and recording
stops automatically.