Create WIND PROP, Руководство пользователя

Страница: 9 / 48

9 ENGLISH
• Connect the single pin plugs on the breakout board to those on the LED panel. The LED
panel is magnetized so it attaches to the backplane by simply snapping the two pieces
together.
Note : While installing or removing the LED board, be careful not to touch the insulating tabs.
Do not overtighten or fasten the screws as this may cause damage to the insulating tabs.
• Thread the decorative shade onto the LED plate and secure with decorative clips and nuts.
• Unscrew one fixing screw. Fix the patch panel to the bottom of the fan by inserting the
other two fixing screw heads into the keyhole slots, rotate it to fit, then secure the previous
fixing screw by aligning the screw hole and the keyhole. on the bottom of the fan, tighten
the remaining setscrews to secure the connection panel.
PATCH PANEL MOUNT, LED PANEL AND THE DECORATIVE SCREEN