background image

 Contents

5

Vectron Player

 Index

The Joystick

With the Joystick you can modulate the
relative volumes of the individual
oscillators in real time. You can also
choose whether the joystick output
value returns to a central null position
or to another pre-determined position
after it is released.

The Null Point

The joystick control features a variable
null position. This is important if you
want to use the AutoReturn function,
but you do not necessarily want the
vector position to return back to the
center.

To change the null return point, use the
joystick to move the point to the desired
position while holding down the Ctrl key.
The position will now return to this point
when the joystick is released and
AutoReturn is enabled. To reset the null
position to the center, double click on
the point while pressing the Ctrl key.

AutoReturn: Disable AutoReturn if you
do not want the position to return to the
null point when you release the joystick.

Faders

Use the faders to move the vector
position only in one dimension.
Furthermore, you can control the joystick
via MIDI - for example, from an external
fader box - using the two MIDI Controller
messages (controller numbers 12 and
13) which are assigned to the X and Y
faders.

Sets the Joystick to remain „on top“

Closes the Joystick

Содержание Noah Vectron Player







Отзывы: