8
Interpole
Sustain
The Sustain level—the level at which the
signal remains after the attack phase and
while the gate is open. When the gate
closes, the envelope directly enters the
release phase.
Release On/Off
When set to
On, the release phase
assumes the
Decay time as the release
time. When the envelope generator
receives a Gate Off signal, it immediately
enters the release phase, and the envelope
completes with the adjusted release time
from the previous level. In the
Off position,
the release is set to minimum, at which
release is disabled.
Link In/Out
With Link
In, the left channel modulation
signal is also used by the right channel to
facilitate the handling of stereo audio
signals.
LFO
The LFO parameters provide another playground for sound manipulation. Six different
modulating waveforms are available. The rate can be set manually or controlled by the
MIDI clock, and further modulated in principal by the envelope. In addition, the LFO can
be restarted via MIDI to retain suitable sync with a song. Filter frequency and amplitude
are independently adjustable. In Link mode the LFO switches from the first channel to
the second. By inverting the modulation on the second channel, interesting stereo filter
and autopan effects develop.
Retrig MIDI/Off
Restarts the LFO with each MIDI note-on
message. The starting phase position is
determined by the
Init Phase setting. If
MIDI is enabled, any MIDI note will restart
the LFO waveform. Make sure the correct
MIDI channel is selected.
Sync MIDI/Off
Synchronizes the LFO oscillation to MIDI
clock. To adjust the speed, select a tempo
and a note value. When switched to
MIDI,
synchronization is enabled. In the
Off
position the speed (rate) is set manually.
