HARDWARE
TOOLS REQUIRED
COMPONENTS
Made in Vietnam - r03
Page 1 of 2
Thank you for purchasing the Spotlight Large Desk.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
SPOTLIGHT
LARGE DESK
Missing hardware? Please call 800.606.6387 for replacements.
4 - long
bolts
12- spring
washers
12 - flat
washers
2 - barrel
nuts
2 - screw
posts
2 - set screws
8 - short
bolts
Customer Service 800.967.6696 | Lastest instructions available at www.crateandbarrel.com
1 - tabletop
assembly
1 - crossbar
2 - leg frames
(1 left, 1 right)
1 Lay both leg frames face down on a clean, padded
surface as shown. Insert 1 screw post into each leg and
secure with a flat head screwdriver. Note: Make sure to
align slot on top of screw post parallel to leg. Do not over
tighten screw posts.
NOTE:
Make sure to align
slot of screw post
parallel to leg
NOTE:
Do not over
tighten screw
posts
left leg frame
right leg frame
phillips head screwdriver
flat head screwdriver
(We recommend the use of hand tools instead of power tools)
