Cranborne THI 10-50c, Инструкция по установке, наладке и обслуживанию

Страница: 28 / 66

- 29 -
INSTALLATION
3.2.4 - Extraction by vertical balanced flue
(C
33
)
Besides the previously mentioned installation regu-
lations pertaining to flues, the vertical flue terminal
must allow a minimum distance of 30 cm between
the roof level (sloping or flat) and the air intake zone.
The proximity of two terminals is also regulated: it is
recommended that two adjoining terminals should
be placed in the same horizontal plane. If this can-
not be applied, the axis of the lower terminal must
be at a distance of at least 0.40 m from the closest
point of the air intake hole of the highest terminal.
R
ecommendations
Horizontal parts must be avoided to
prevent any risk of condensate reten-
tion.
It is recommended to use 45° bends ra-
ther than 90° bends.
Use fastening collars for the vertical
parts.
Position the terminal at least 1 metre
from a vertical wall (end walls).
Apply liquid soap to approximately 5
cm of the part of the tube to be fitted to
make assembly easier.
3.2.4.1 - Polypropylene/PVC concentric
vertical terminal (option)
For sloping roofs.
(*) Useful length under sleeve tile - l = 0.43 m
3.2.4.2 - Sleeve tile with adaptive coupling
(option)
*Suitable for all types of tiles, for flat tiles < 8 mm
use the Slate model
If accessories of any other brand are used, our gua-
rantee of watertightness will be automatically void
3.2.4.3 - Polypropylene/PVC concentric
extensions (option)
Joint fitting.
(*) Useful length after assembly - l = 0.45 m or 0.95 m
Maximum length of vertical flue = 8 m
40 cm
mini
30 cm
mini
FCX-19-0
Fig. 25
!
Reference Colour
Length
(*) mm
Æ int.
mm
Æ ext.
mm
N40.28393 Tile 1080 80 125
N40.28394 Black 1080 80 125
Reference Slope
Type of
covering
Colour
N40.12165 25 ° - 45 ° Tile* Tile
N40.12166 35 ° - 55 ° Tile* Tile
N40.12167 35 ° - 55 °
Slate -
Shingle
Black
Reference
Length
mm
Æ int.
mm
Æ ext.
mm
N40.28397 500 80 125
N40.28398 1000 80 125
FCX-20-0
Fig. 26
AM5-22-0
Fig. 27
AM5-23-0
Fig. 28