Getting Started
Controls, Switches, and Connectors
[1] Source Switch: Toggles the input source of
each 500 series slot between C.A.S.T., Analogue,
and ADAT sources.
[5] Power Switch: Safely powers on and off
500ADAT as well as any inserted 500 series
module. Tap to power on, press and hold to
power off.
[2] Mix Level & Pan Controls: Adjusts the level
and pan position of each 500 series slot into the
built-in Summing Mixer.
[6] Aux 1 & 2 Blend Controls: Blends the
Summing Mixer and Aux Input together into the
Aux 1 and 2 Busses independently.
[3] Chain Switch: Sends the output of the
preceding module into the input of the next. (1
into 2, 2 into 3, 3 into 4 etc).
[7+8] Aux 1 & 2 Level Controls: Adjusts the main
level of Aux 1 and 2 to their discrete headphones
and Aux Output 1/4” jack outputs on the rear
panel.
[4] Slot Bypass Switch: Bypasses the 500 series
slot to enable recording without a module
installed. All other features function normally
when slot bypass is engaged.
[9] Aux 1 & 2 Headphones Outputs: Used for
connecting Independent headphones to Auxes 1
and 2.
500ADAT User Manual
-Page 6-
©201
9
Cranborne Audio Ltd
