Leaf and litter vacuum
Original Operation Manual
English -7
Collection bag release
The adjustment lever is used to unlock or lock the collection bag when
removing or attaching it. The collection bag is attached to a support
frame which is always detached together with the bag when the bag is
removed.
Removing the collection bag
1. To be able to remove the collection bag, you must first pull the
throttle lever toward you (to the idle position).
2. The collection bag release can then be pulled toward you. The roller
frame is lowered/unlocks and the frame with the collection bag can
be removed.
3. Detach the collection bag from the support and empty it.
Note! The collection bag cannot be removed until the throttle lever
has been moved.
Attaching the collection bag
1. To attach the collection bag, the support frame with the collection
bag is placed on the machine support and is then pushed
completely onto the holding fixture.
2. First push the release bar back in order to raise the collection bag
again and lock it.
3. Then push the throttle lever away from you.
Switching on the motor
1
Choke lever
2
Fuel tap
3
Tank opening
4
Starter handle
5
Ignition switch ON/OFF
1 = Choke
2 = Fuel tap
Starting the motor:
1. Move the choke lever to the left (CLOSED)
The choke is always needed for a cold-start.
2. Open the fuel tap (ON).
3. Move the ignition switch to ON
4. Pull the starter handle until you feel resistance, then pull it out quickly
and forcefully. Guide the starter handle back gently.
5. Using the throttle lever on the control console, set the motor power to
FULL or STOP (idle).
6. Move the choke lever to the right (OPEN).
Switching off the motor:
1. Move the motor switch to OFF
2. Close the fuel tap (OFF)
(turn the lever to the left)
Collection bag
removal
Collection bag
attachment
