Leaf and litter vacuum
Original Operation Manual
English -16
3.
Use the bolts to fasten the control console
to the side wall.
4.
For transport reasons, the bar of the height
adjustment lever has been divided into two
parts. The bolts required for these parts are
located at the bore holes of the bar.
5.
Remove the bolts and nuts from the bar.
6.
Hold the two ends of the bar together so
that the bore holes are aligned. Place a
washer on each of the two bolts and secure
using the washer and nut.
1
Bolt connection from
item 1
4
Height adjustment bar
7.
The blower outlet must be secured between
the fan and the control console.
8.
Remove the locking nut with the washer
from the flange on the control console.
9.
Then remove the bolt connections (bolt,
washers and nut) on the flange of the fan
housing.
10.
Hold the blower outlet against the control
console and secure with the washer and
locking nut (illustration).
11.
Secure the blower outlet to the fan housing
using the bolts as shown in the illustration at
the bottom.
5
Blower outlet
6
Flange with rubber
seal
(M6x25)
7
Flange with rubber
seal
(Locking nut M6)
The required bolts,
washers and nuts are
attached to the respective
flange. Please secure the
bolts in the same way.
