Craftsman CMCF820 Скачать руководство пользователя страница 6

English

4

BATTERIES AND CHARGERS

The battery pack is not fully charged out of the carton. 
Before using the battery pack and charger, read the 
safety instructions below and then follow charging 
procedures outlined. When ordering replacement battery 
packs, be sure to include the catalog number and voltage.

The label on your tool may include the following symbols. The 
symbols and their definitions are as follows:

V ......................... volts
Hz .......................hertz
min .....................minutes

 or DC ......direct current

 ...................... Class I Construction 

(grounded)

…/min ..............per minute
BPM ....................beats per minute
IPM .....................impacts per minute
RPM .................... revolutions  per 

minute

sfpm ................... surface feet per 

minute

SPM ....................strokes per minute
OPM .................... oscillations  per 

minute

A .........................amperes
W ........................watts

 or AC ...........alternating current

 or AC/DC .... alternating  or 

direct current

 ...................... Class  II 

Construction 
(double insulated)

no .......................no load speed
n .........................rated speed

 ......................earthing terminal

 .....................safety alert symbol
 .....................visible radiation
 ..................... avoid staring at 

light

 ..................... wear  respiratory 

protection

 ..................... wear  eye 

protection

 ..................... wear  hearing 

protection

 ..................... read  all 

documentation

IPXX .................... IP  symbol

follow the warnings and instructions may result 
in electric shock, fire and/or serious injury.

• 

Do not charge or use the battery pack in explosive 
atmospheres, such as in the presence of flammable 
liquids, gases or dust.

 Inserting or removing the battery 

pack from the charger may ignite the dust or fumes.

• 

When battery pack is not in use, keep it away from 
other metal objects, like paper clips, coins, keys, 
nails, screws, or other small metal objects, that can 
make a connection from one terminal to another. 

Shorting the battery terminals together may cause burns 
or a fire.

• 

NEVER force the battery pack into the charger. DO 
NOT modify the battery pack in any way to fit into 
a non-compatible charger as battery pack may 
rupture causing serious personal injury.

•  Charge the battery packs only in CRAFTSMAN chargers.
• 

DO NOT

 splash or immerse in water or other liquids.

• 

Do not store or use the tool and battery pack in 
locations where the temperature may reach or 
exceed 104 °F (40 °C) (such as outside sheds or metal 
buildings in summer).

 For best life store battery packs in 

a cool, dry location.

 

NOTE: Do not store the battery packs in a tool with 
the trigger switch locked on. Never tape the trigger 
switch in the ON position.

• 

Do not incinerate the battery pack even if it is 
severely damaged or is completely worn out.

 The 

battery pack can explode in a fire. Toxic fumes and 
materials are created when lithium-ion battery packs 
are burned.

• 

If battery contents come into contact with the skin, 
immediately wash area with mild soap and water. 

If 

battery liquid gets into the eye, rinse water over the open 
eye for 15 minutes or until irritation ceases. If medical 
attention is needed, the battery electrolyte is composed of 
a mixture of liquid organic carbonates and lithium salts.

• 

Contents of opened battery cells may cause 
respiratory irritation.

 Provide fresh air. If symptoms 

persist, seek medical attention.

 

WARNING:

 Burn hazard. Battery liquid may be 

flammable if exposed to spark or flame.

 

WARNING:

 Fire hazard. Never attempt to open the 

battery pack for any reason. If the battery pack case 
is cracked or damaged, do not insert into the charger. 
Do not crush, drop or damage the battery pack. Do 
not use a battery pack or charger that has received a 
sharp blow, been dropped, run over or damaged in 
any way (e.g., pierced with a nail, hit with a hammer, 
stepped on). Damaged battery packs should be 
returned to the service center for recycling.

Storage Recommendations

1.  The best storage place is one that is cool and dry, away 

from direct sunlight and excess heat or cold.

2.  For long storage, it is recommended to store a fully 

charged battery pack in a cool dry place out of the 
charger for optimal results.

 

WARNING: 

Use of this tool can generate and/

or disperse dust, which may cause serious and 
permanent respiratory or other injury. Always use 
NIOSH/OSHA approved respiratory protection 
appropriate for the dust exposure. Direct particles 
away from face and body.

 

WARNING: Always wear proper personal hearing 
protection that conforms to ANSI S12.6 (S3.19) 
during use. 

Under some conditions and duration 

of use, noise from this product may contribute to 
hearing loss.

 

CAUTION:

 

When not in use, place tool on its 

side on a stable surface where it will not cause 
a tripping or falling hazard. 

Some tools will stand 

upright but may be easily knocked over.

• 

Air vents often cover moving parts and should be 
avoided.

 Loose clothes, jewelry or long hair can be 

caught in moving parts.

READ ALL INSTRUCTIONS

Important Safety Instructions for All 
Battery Packs

 

WARNING: Read all safety warnings, 
instructions, and cautionary markings for the 
battery pack, charger and product. Failure to 

Содержание CMCF820





































Отзывы: