Craftsman 944.369060, Руководство пользователя

Страница: 13 / 44

13
TO ADJUST HANDLE
(See Fig. 11)
The handle can be mounted in a high or low position. The
mounting holes in the bottom of lower handle are off center
for raising or lowering the handle.
• Remove upper handle and all parts attached to lower
handle.
• Remove hairpin cotters from lower handle bracket mount-
ing pin.
• Squeeze lower handle in to remove it from mounting
pins.
• Turn lower handle over to raise or lower handle.
• Squeeze lower handle in and position holes onto mount-
ing pins on handle bracket.
• Reassemble upper handle and all parts removed from
lower handle.
LAWN MOWER
TO ADJUST CUTTING HEIGHT
See "TO ADJUST CUTTING HEIGHT" in the Operation
section of this manual.
REAR DEFLECTOR
The rear deflector, attached between the rear wheels of your
mower, is provided to minimize the possibility that objects
will be thrown out of the rear of the mower into the operator
mowing position. If the deflector becomes damaged, it
should be replaced.
DISCHARGE GUARD
The discharge guard attached to the discharge opening of
your lawn mower, is provided to prevent the possibility of
injury resulting from objects being thrown out of the dis-
charge opening into the operator mowing position. If the
discharge guard becomes damaged, it should be replaced.
CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:
• Release control bar and stop engine.
• Make sure the blade and all moving parts have completely stopped.
• Disconnect spark plug wire from spark plug and place where it cannot come in contact with plug.
FIG. 11
LOWER
HANDLE
ROTATE
ENGINE
CARBURETOR
Your carburetor has a non-adjustable fixed main jet for
mixture control. If your engine does not operate properly
due to suspected carburetor problems, take your lawn
mower to an authorized service center for repair and
adjustment.
IMPORTANT: NEVER TAMPER WITH THE ENGINE
GOVERNOR, WHICH IS FACTORY SET FOR PROPER
ENGINE SPEED. OVERSPEEDING THE ENGINE ABOVE
T H E F A C T O R Y H I G H S P E E D S E T T I N G C A N B E
DANGEROUS. IF YOU THINK THE ENGINE-GOVERNED
HIGH SPEED NEEDS ADJUSTING, CONTACT YOUR
NEAREST AUTHORIZED SERVICE CENTER, WHICH HAS
PROPER EQUIPMENT AND EXPERIENCE TO MAKE ANY
NECESSARY ADJUSTMENTS.
ENGINE SPEED
The engine speed has been factory set. Do not attempt to
increase engine speed as it may result in personal injury.
If you believe the engine is running too fast or too slow, take
your lawn mower to an authorized service center for repair
and adjustment.
SERVICE AND ADJUSTMENTS