Страница 1: ... injury when they break USE FACE OR DUST MASK along with safety goggles if cutting or routing operation is dusty Make sure work area is well ventilated NEVER PLACE HANDS IN THE PATH OF THE CUTTER or under the workpiece USE HEARING PROTECTION particularly during extended periods of operation ALWAYS RE TIGHTEN COLLET before starting the tool after a cutting bit or accessory has been changed Loose bi...
Страница 2: ...ng on the quick connect lever 9 Fig 3 To insert an accessory into the flex shaft collet rotate collet nut 12 until hole in shaft aligns with hole in flex shaft collar 11 see Fig 4 Insert Allen key 10 into aligned holes and use the small fiat wrench supplied 13 to turn collet nut counter clockwise g When collet is loose insert accessory and turn collet clockwise to tighten making sure the accessory...
