10 ― English
ASSEMBLY
UNPACK
This product requires assembly.
■ Carefully remove the product and any
accessories from the box. Make sure that all
items listed in the packing list are included.
■ Inspect the product carefully to make sure
no breakage or damage occurred during
shipping.
■ Do not discard the packing material until
you have carefully inspected and satisfactorily
operated the product.
YOU WILL NEED (ITEMS NOT SUPPLIED)
■ Screwdriver, flat head
■ Suitable personal protective equipments.
PACKING LIST
Mower
Safety Key (Attached inside the Battery Pack
Compartment of Mower)
Mulching Plug - Comes installed from factory
at rear of mower
Grass Collection Bag Assembly (Bag & Metal
Frame)
Side Discharge Chute
Battery Charger
60V Lithium-Ion Battery
Operator’s Manual
NOTE:
The safety key must be installed for
mower to operate. The safety key only fits
into the switch in one direction.
DO NOT
FORCE IT!
WARNING!
If any parts are damaged or missing, do
not operate this product until the parts are
replaced. Failure to heed this warning so
could result in serious personal injury.
Do not attempt to modify this product or
create accessories not recommended for use
with this product.
Any such alterations or modifications of this
product are misused and could result in a
hazardous condition leading to possible
serious personal injury.
Do not connect power supply until assembly
is complete. Failure to comply could result
in accidental starting and possible serious
personal injury.
Never operate the mower without the proper
safety devices in place and working. Never
operate the mower with damaged safety
devices. Failure to heed this warning can
result in serious personal injury.
ASSEMBLING THE COLLECTION BAG
See Figures 2-3, page ii
Your Craftsman comes with a Dust Blocker
collection bag. The Dust Blocker fabric
prevents dust from blowing through it during
mower operation.
To assemble:
■ Check the collection bag before assembling
to make sure there is no damage.
■ Pull the collection bag over the steel frame
as shown. Be sure to insert the frame handle
through the slot in the top of the bag so that
the handle is on the outside.
■ With your fingers or a flat blade screwdriver,
pry open the plastic clamping sleeves. Clamp
the sleeves over the top, bottom and side
rods of the steel frame as shown.
NOTE
: If you use screwdriver to assist in
prying, be careful not to tear bag fabric