Electrical Connection
20 / 27
Doc. No.: 9.0020.0589B0
Wiring
4.4.1 Cable connection
Figure 4-3 Cable connection
Perform cable connection according to the following steps:
Grounding
1.
Connect its grounding cable to the GND terminal.
2.
Tighten the GND terminal with M12 securing screws, flat washers and
spring washers.
Input terminal
1.
Connect its input terminals to the output terminal of the inverter.
2.
Tighten the terminal with M12 securing screws, flat washers and
spring washers.
Output terminal
1.
Connect its output terminals to the grid power.
2.
Tighten the terminal with M12 securing screws, flat washers and
spring washers.
CAUTION!
In order to guarantee the personal safety and device function,
connect the cables following strictly the polarities marked on the
device to avoid short circuit hazards.
