Mechanical Installation
16 / 27
Doc. No.: 9.0020.0589B0
Open and close the door
In order to guarantee the protection performance of the Combiner, three hasp
locks with lock holes are provided, refer to the figure 3-5.
After completing the operation, all the hasp locks (1) shall be locked, to avoid
accidental turning the operation handle (2) of the disconnect switch and
opening of the Combiner further, thus causing the risk of electric shock!
Figure 3-5 The overview of hasp locks
3.4.1 Open the door
You can find the view of hasp lock in figure 3-6.
Figure 3-6 Hasp lock
WARNING!
Make sure the power supply is disconnected before opening and
closing the Combiner.
