Mechanical Installation
Doc. No.: 9.0020.0589B0
15 / 27
3.
Slide the side plate of Combiner along the mounting bracket, until it
stays closely with the fixed bracket.
Figure 3-3 Slide the Combiner
4.
Fasten the fixed bracket onto the hooks of the Combiner by screwing
another two M4*12 securing screws into the holes of the fixed bracket.
Then fasten another fixed bracket onto the other side of the mounting
bracket to avoid the accidental movement of the Combiner.
Figure 3-4 Fasten the fixed bracket
IMPORTANT!
For the assembly instructions and assembly procedures of the
integrated bracket, please download the specific manual from our
office website.
