Hold the bottom case in a vice.
Remove the socket bolt with an Allen
wrench.
Remove the fork pipe, seat pipe and oil
lock piece.
Check each part for wear or damage and
replace if necessary.
FORK TUBE INSPECTION
Place the fork tube in V-blocks and
measure the runout with a dial indicator
gauge.
The actual runout is 1/2 of TIR (
Total
Indicator Reading
).
SERVICE LIMIT : 0.2
㎜
Measure the fork tube O. D. at the
several points along the sliding surface.
SERVICE LIMIT : 30.9
㎜
Remove the dust seal cover.
Remove the snap ring with a snap ring
pliers.
文件使用
"pdfFactory"
试用版本创建
Downloaded
from
www.ScooterTime.net
