CP Electronics DD-LCDHS, Руководство по эксплуатации продукта

Страница: 1 / 8

1. Description and Operation
2. LCD Navigation
The DD-LCD-HS is the programming tool for all products in the –DD
(Direct Dim), -PRM (PRM) and MWS7 ranges.
On button
To turn the unit on press the „on‟ button. This button is also used for
selecting parameters and then sending to the device being
programmed.
Up, down. Left and right buttons
Use to navigate through the menus. The up and down buttons are
also used for selecting values or toggling between on / off, yes / no
etc.
To turn the unit off, either select the final main menu item or the unit
will turn off after 30 seconds.
Section Contents Page
1 Description and operation 1
2 LCD Navigation 1
3 Menu tree 2
4 Detector Parameter Menu 3
5 Modes menu 4
6 Ch1 (sw) set Menu 5
7 Ch2 (dim) set Menu 6
8 User menu 7
9 Ratings 8
Menu selection
Use the < > buttons to scroll through the menus. Press „on‟ to select.
Parameter selection
Use the < > buttons to scroll through the menus. Press „on‟ to select
menu. Use the up and down buttons to select values or toggle
between on / off, yes / no. Press „on‟ to send parameter to device.
Contents
Direct Dim, PRM and MWS7 Handset
Product Guide
DD-LCDHS