manualshive.com logo in svg

Covidien ClosureRFG, Руководство по эксплуатации, Страница: 84 / 99

Поделиться
Скачать
Covidien ClosureRFG Скачать руководство пользователя страница 84

Caution

Protect against harmful ingress of water or particulate matter. Generator classification: IPX0 (no 
protection).

10-2

ClosureRFG Radiofrequency Generator

Fuse Replacement

Fuse Replacement

In the event of a fuse failure, replace the fuses using the following procedure, as shown: 

Caution

Fuses must be replaced with 5 A/250 V, 5x20 mm fuses. Using other fuses might damage the unit.

1. Disconnect the ClosureRFG radiofrequency generator’s AC power cord from the AC 

power inlet (1).

Fuse Replacement

1

2

3

4

5

2. Insert a small blade screwdriver into the small slot located on the left side of the holder 

(2) and pry the retaining clip out a small distance to loosen the latch.

3. Insert the blade into the small slot located on the right side of the holder (3) and pry 

the retaining clip out a small distance.

4. Pull the fuse holder drawer (4) out.

5. Replace the fuses (5).

6. Reinsert the fuse holder by pushing it until the holder’s front surface is flush with the 

ClosureRFG generator surface and the latches engage.

Содержание ClosureRFG




































































































Отзывы:

Нет отзывов