7-4
ClosureRFG Radiofrequency Generator
40
The installed SW is not
compatible with the
HW revision.
Cycle system power and insert a USB device with the latest
system SW. Upgrade the system from the “About” tab.
Cycle the system power again. If the system does not
respond and/or the same error code is displayed, contact
Covidien customer service.
41
The ClosureRFG
generator
unexpectedly reset.
Cycle system power and allow the POST to complete. If the
system does not respond and/or the same error code is
displayed, contact Covidien customer service.
43
This error indicates
that there is something
wrong with the
software.
Cycle system power and insert a USB device with the latest
system SW. Upgrade the system from the “About” tab.
Cycle system power again. If the system does not respond
and/or the same error code is displayed, contact Covidien
customer service.
44
This error indicates
that error log was
corrupt and has been
cleared.
Remove the USB device, clear the data on the device and
reinsert. Cycle system power and allow POST to complete. If
the issue persists, reformat the USB device on your PC by
right clicking the device and selecting “format.” The device
must be formatted to FAT32. If the issue is seen again, try a
different USB device. If the system does not respond and/or
the same error code is displayed, contact Covidien customer
service.
45
The error occurs when
the measure mode
power is greater than
10 mW for more than
1 second.
Cycle system power and allow the POST testing to complete.
If the system does not respond and/or the same error code is
displayed, contact Covidien customer service.
46
There is something
wrong with the UIC
Flash and the software
was unable to correctly
write data to it.
Cycle system power and insert a USB device with the latest
system SW. Upgrade the system using the “About” tab.
Cycle system power again. If the system does not respond
and/or the same error code is displayed, contact Covidien
customer service.
47
Touchscreen error.
Cycle system power and allow the POST testing to complete.
If the system does not respond and/or the same error code is
displayed, contact Covidien customer service.
Error
Code
Description
Corrective Action