Owner’s Manual
Model # CH1131 - Chevrolet Corvette
About Your Coverking® Product
Congratulations on your purchasing decision. Coverking® designed this Front End Cover to be the very best available. With
proper care, your Coverking® Front End Cover will provide years of stylish looks and maximum protection.
Installation of the Coverking® Front End Cover is a simple process that should take about 30 minutes. Removal and reinstallation (as for car wash-
ing) takes just a few minutes.
If you encounter any problems during the installation of your Coverking® Front End Cover, please contact our Consumer Response Department,
Monday - Friday, 7AM - 5PM (PST) at 1-800-400-1120.
Note: Please read this manual thoroughly before beginning the installation. After completing installation, keep this manual for further refer-
ence.
Tips for Easier Installation and Care
[]
-
derneath the Coverking® Front End Cover.
[]
Install the Coverking® Front End Cover in temperatures of 70˚F (21˚C) or higher. The warmth will make the fabric more pliable and will allow it
[]
Do not use vinyl cleaners or protectants on your Coverking® Front End Cover. These cleaners reduce the breathability of the vinyl and will void
the Coverking® Warranty.
[]
Do not install the Coverking® Front End Cover on any vehicle that does not still have its original factory paint. Coverking® will not be
held liable for any warranty claims of paint damage to repainted vehicles.
[]
Remember that the Coverking® Front End Cover also protects paint from fading due to sunlight while the rest of the car is exposed.
Coverking® will not be held liable for any warranty claims on sun-faded paint.
[]
Caution: There may be elastic straps described in some sections of this manual that can snap back if not properly hooked. To avoid inju-
ries, exercise caution and use safety glasses when installing.
[]
Where available, always use the loops sewn to the cover to remove the plastic clips. DO NOT PULL UP ON THE CLIPS OR THE FABRIC TO
REMOVE THE COVER. When removing the cover, it will be easiest to reverse the installation steps.