COVANA Evolution GHSC, Руководство по установке

Страница: 10 / 56

10 GLOSSARY INSTALLATION MANUAL
GLOSSARY
Part Figure Function
All-weather seal The all-weather seal prevents water from leaking between the
sleeves when the Covana cover is fully closed. Failure to install this
part may result in water infiltration in between the sleeves and
damage to the mechanism.
Binding block The binding block is used during installation to tighten the I-beams
with the panels. It allows the use of straps without damaging the
components of the Covana.
C channel The C-channel is the outer frame of the cover. The panels are
installed between the C-channels
Contour seal The contour seal ensures uniform contact between the inner shell
and the hot tub. It prevents excessive water and other contaminants
from entering the hot tub. It also reduces heat loss.
Contour seal
installation clip Contour seal installation clips are used during the installation
process to ensure the seal is installed properly.
Contour seal
connector The seal connector is used to link both ends of the seal. It ensures
a strong and effective joint.
Figure 6
Figure 4
Figure 5
Figure 1
Figure 2
Figure 3