background image

 

 

Instruction Manual 

CU560-1 

FM Portable Radio 

 

Thank you for purchasing a 

COVALUE

 two-way radio. This simple to use radio adopts the latest 

advances in technology, providing reliable communication in today’s demanding communication 

environment.  

 

Notice to the User: 

·

  Please read this instruction manual before operating this radio.   

·

  It’s prohibited to use the radio or charge it at any area with a potentially explosive atmosphere 

(where the air contains gas, dust and smog, etc.), as well as while taking on fuel, or while 

parking at a gasoline service station; or any area where radio communication is prohibited 

(such as a hospital or a airport.) 

·

  It’s prohibited to operate the radio without permission in areas where the government laws 

prohibit radio communication. 

·

  Please don't expose the radio to direct sunlight for a long time; don't place the radio near any 

heating devices, either. 

·

  Please don't put the radio in extremely dusty, moist humid areas or unstable surfaces. 

·

  Only qualified personal, with proper tools and instruments are allowed to service and repair the 

radios, do not disassemble the radio by yourself to avoid damages. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Warning

Your radio generates RF electromagnetic energy during transmit mode. This radio is designed for 

and classified as "ccupational Use Only" meaning it must be used only during the course of 

employment by individuals aware of the hazards, and the ways to minimize such hazards. This 

radio is NOT intended for use by the "eneral Population"in an uncontrolled environment. 

This radio has been tested and complies with the FCC RF exposure limits for "ccupational Use 

Only" In addition, your SHENZHEN COVALUE COMMUNICATIONS CO.,LTD.radio complies 

with the following Standards and Guidelines with regard to RF energy and electromagnetic energy 

levels and evaluation of such levels for exposure to humans:   

1. FCC OET Bulletin 65 Edition 97-01 Supplement C, Evaluating Compliance with FCC 

Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields.   

2. American National Standards Institute (C95.1-1992), IEEE Standard for Safety Levels with 

Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz.   

3. American National Standards Institute (C95.3-1992), IEEE Recommended Practice for the 

Measurement of Potentially Hazardous Electromagnetic Fields- RF and Microwave.   

Содержание CU560-1














Отзывы: