3
5
3
1
2
Attention:
Make sure that each bolt needed for all steps matches
the corresponding figure to ensure proper assembly.
Step 1:
Place the right leg (#1) onto a non-abrasive surface,
such as a carpet,
with the brackets facing
upwards.
Insert the
braces (#3) into legs (#1 and #2). Fasten
them
together
by using bolts (#5).
Keep the bolts loose.
See Figure 1.
Note:
1.
The labels marked “L” and “R” on legs (#1 and #2)
should coincide with Figure 1 to ensure proper
assembly.
2. The holes in the braces (#3) must be facing towards
the inside.
PAGE 1 OF 2
COURTYARD CREATIONS INC.
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
HEX. KEY WRENCH 10MM
HEX. KEY WRENCH 4MM
BOLT M6*35
BOLT M6*15
FIGURE 1
XTM011Z
PARTS LIST
PART
NO.
PART
NO.
MATERIAL CODE
MATERIAL CODE
PART
PART
Q’TY
Q’TY
1
1
1
1
2
4
6
7
8
4
1
1
XTM011Z-CS04-4
XTM011Z-CS04-3
62XTM011ZQ101
XTM011Z-CS11-1
17C40A0705001YX
17C40A0712001YX
17KAA0101----Y4
17KAC3101----Y3
RIGHT LEG
LEFT LEG
BRACE
SEAT ASSEMBLY
2
3
4
5
L
R
STOP DO NOT RETURN TO STORE!
Use the correct bolts as indicated. Do not tighten any of the bolts until the ottoman is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings
required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
!
!
!
!
!
V-3
15
#5 BOLT M6*15
