10
#5 BOLT M6*10
3
5
3
1
2
Attention:
Make sure that each bolt needed for all steps matches
the corresponding figure to ensure proper assembly.
Step 1:
Place the right leg (#1) onto a non-abrasive surface,
such as a carpet, with the brackets facing upwards.
Insert the braces (#3) into legs (#1 and #2). Fasten
them together by using bolts (#5). Keep the bolts loose.
See Figure 1.
Note:
1.
The labels marked “L” and “R” on legs (#1 and #2)
should coincide with Figure 1 to ensure proper
assembly.
2. The holes in the braces (#3) must be facing towards
the inside.
Use the correct bolts as indicated. Do not tighten any of the bolts until the ottoman is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings
required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC No. when contacting the service center.
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE!
INTENDED FOR RESIDENTIAL USE ONLY.
BOLT M6*35
BOLT M6*10
FIGURE 1
XTM011R
PARTS LIST
PART
NO.
PART
NO.
MATERIAL CODE
MATERIAL CODE
PART
PART
Q’TY
Q’TY
1
1
1
1
2
4
6
7
8
4
XTM011R-CS04-4
XTM011R-CS04-3
62XTM011RQ101
XTM011R-CS02-1
17C40A0702001YX
17C40A0712001YX
RIGHT LEG
LEFT LEG
BRACE
SEAT ASSEMBLY
2
3
4
5
L
R
HEX. KEY WRENCH 4MM
1
1
17KAA0101----Y4
17KAC3101----Y3
HEX. KEY WRENCH 10MM
V-3
PAGE 1 OF 2
STOP DO NOT RETURN TO THE STORE!
COURTYARD CREATIONS INC.
!
!
!
!
!
