FIGURE 1
Use the correct bolts as indicated. Do not tighten any of the bolts until is completely assembled.
Do not sit or stand on this table.
Do not discard any of the packaging until you have checked that you have all the parts and pack
of fittings.
Keep children away during assembly. This item contains small parts which can be swallowed by
children. Children should always be under direct adult supervision while using the product.
Retain the assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
Step 1:
Place the table top (#1) onto a non-abrasive
surface, such as a carpet, with its underside
facing upward. Insert the legs (#2) into the plastic
holders on the underside table top (#1) rim. Fasten
them together by using screws (#4). See Figure 1.
You will need the following tools:
- Phillips Screwdriver (Not Included)
- Hex. Key Wrench (See Parts #8)
HEX.KEY WRENCH 6MM
BOLT CAP M6
WASHER d6.5*D13*1.0
BOLT M6*16
SCREW ST4.2*12
CENTER CONNECTOR
LEG
TABLE TOP
17KAA0201----Y4
18000337002
17C01A0706002Y4
17FA05040301-Y4
17C17A0403001Y4
62TGS40NWY101
TGS40NW-CS02
8
8
8
1
TGS40NW-CS01
8
7
6
4
5
1
4
1
4
3
2
1
Q’TY
PART
MATERIAL CODE
PART
NO.
Q’TY
PART
MATERIAL CODE
PARTS LIST
PART
NO.
TGS40NW
-WM
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
COURTYARD CREATIONS INC.
!
!
!
!
!
!
4
1
2
2
2
2
PAGE 1 OF 2
STOP DON’T RETURN TO STORE!
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
