FIGURE 1
Step 1:
Place the table top (#1) onto a non-abrasive
surface, such as a carpet, with its underside facing
upwards. Insert the legs (#2) into the plastic holders
attached on the underside of the table top (#1) rim.
Fasten them together by using screws (#5).
See Figure 1.
You will need the following tools:
- Phillips Screwdriver (Not Included)
- Hex. Key Wrench (See Part #10)
- Nut Wrench (See Part #11)
HEX.KEY WRENCH 6MM
NUT WRENCH 10&13MM
BOLT CAP M6
WASHER d6.5*D13*1.0
BOLT M6*55
SCREW ST4.2*12
CENTER CONNECTOR
CENTER
CONNECTOR WITH RING
LEG
TABLE TOP
17KAA0201----Y4
17KAB1101----Y4
18000337002
17C01A0719072Y4
17FA05040301-Y4
17C17A0403001Y4
62TGS38FGY101
62TGS38FGY102
TGS38FG-CS02
8
16
8
8
1
1
TGS38FG-CS01
9
10
11
8
7
1
4
6
1
4
1
4
5
3
2
1
Q’TY
PART
MATERIAL CODE
PARTS LIST
PART
NO.
TGS38FG
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
PAGE 1 OF 2
PLASTIC NUT M6*P1.0
18000C23001
5
1
2
2
2
2
STOP DON’T RETURN TO STORE!
COURTYARD CREATIONS INC.
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
Use the correct bolts as indicated. Do not tighten any of the bolts until is completely
assembled.
Do not sit or stand on this table.
A weighted umbrella base must be used when using an umbrella with this table.
Do not discard of any of the packaging until you have checked that you have all of the parts
and fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed
by children. Children should always be under direct adult supervision while using this
product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
!
!
!
!
!
!
!
