PARTS LIST
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
TGS32SC
COURTYARD CREATIONS INC.
PAGE 1 OF 2
V-3
PART
NO.
MATERIAL CODE
PART
Q’TY
1
1
2
3
5
4
6
7
4
4
1
1
4
1
TGS32SC-CS01
TGS32SC-CS02
17C40A0705001YX
17C17A0403001YX
17KAA0101----Y4
TABLE TOP
LEG
CENTER CONNECTOR
SCREW ST4.2*12
BOLT M6*15
HEX.KEY WRENCH 4MM
HEX.KEY WRENCH 10MM
62TGS32SCY101
You will need the following tools:
- Phillips Screwdriver (Not Included)
- Hex. Key Wrench (See Part #6)
- Hex. Key Wrench (See Part #7)
FIGURE 1
Step 1:
Place the table top (#1) onto a non-abrasive
surface, such as carpet, with its underside facing
upwards. Insert the legs (#2) into the plastic holders
on the underside of the table top (#1) rim. Fasten
them together by using screws (#4). See Figure 1.
2
2
2
2
1
4
STOP
DON’T RETURN TO STORE!
Use the correct bolts as indicated. Do not tighten any of the bolts until is completely assembled.
Do not sit or stand on this table.
Do not discard of any of the packaging until you have checked that you have all of the parts and
fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by
children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
SERVICE CENTER TOLL FREE NO
TEL: 1-877-539-7436
FAX: 1-877-539-7439
"
"
"
"
"
"
17KAC3101----Y3
