ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
PAGE 1 OF 2
V-3
Use the correct bolts as indicated. Do not tighten any of the bolts until the table is completely
assembled.
Do not sit or stand on this table.
Do not discard of any of the packaging until you have checked that you have all of the parts and
fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by
children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
SERVICE CENTER TOLL FREE NO
TEL: 1-877-539-7436
FAX: 1-877-539-7439
COURTYARD CREATIONS INC.
SCREW ST4.2*12
CENTER CONNECTOR
LEG
BOLT M6*15
WASHER d6.5*D10*1.6
HEX. KEY WRENCH 10MM
HEX. KEY WRENCH 4MM
TGS27SV
PARTS LIST
PART
NO.
PART
NO.
1
2
3
4
4
4
2
1
5
6
7
8
1
1
8
8
TGS27SV-CS01
TGS27SV-CS02
62TGS28SHY101
17C17A0403001YX
Step 1:
Place the table top (#1) onto a non-abrasive surface,
such as a carpet, with its underside facing upwards.
Insert the legs (#2) into the plastic holders attached on
the underside of the table top (#1) rim. Fasten them
together by using screws (#4). See Figure 1.
17KAC3101----Y3
17KAA0101----Y4
17FC05020601-YX
17C40A0705001YX
TABLE TOP
MATERIAL CODE
MATERIAL CODE
PART
PART
Q’TY
Q’TY
FIGURE 1
2
2
2
2
4
1
STOP DON’T RETURN TO THE STORE!
You will need the following tools:
- Phillips Screwdriver (Not Included)
- Hex. Key Wrench (See Part #7)
- Hex. Key Wrench (See Part #8)
!
!
!
!
!
!
