FIGURE 1
You will need the following tools:
-Phillips Screwdriver (Not included)
-Hex.Key Wrench
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
PARTS LIST
PART
NO.
MATERIAL CODE
PART
Q’TY
PAGE 1 OF 2
Step 1:
Place the table top (#1) onto a non-abrasive
surface, such as a carpet, with its underside
facing upwards. Insert the legs (#2) into the plastic
holders attached on the underside of the table top
(#1) rim. See Figure 1.
TGS27SH
-
WM
1
2
3
4
1
4
1
7
6
5
8
8
8
4
TGS27SH-CS01
TGS27SH-CS02
62TGS27SHY101
18000337002
17C17A0403001Y4
17FA05040301-Y4
17C01A0706002Y4
TABLE TOP
LEG
CENTER CONNECTOR
BOLT CAP M6
SCREW ST4.2*12
WASHER d6.5*D13*1.0
BOLT M6*16
Attention:
Make sure that each bolt needed for all steps
matches the corresponding figure to ensure proper
assembly.
Use the correct bolts as indicated. Do not tighten any of the bolts until is completely
assembled.
Do not sit or stand on this table.
Do not discard of any of the packaging until you have checked that you have all of the
parts and fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed
by children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
!
!
!
!
!
!
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
2
2
2
2
1
STOP
DON’T RETURN TO STORE!
COURTYARD CREATIONS INC.
