PAGE 1 OF 2
V-4
STOP
DON’T RETURN TO STORE!
COURTYARD CREATIONS INC.
FIGURE 1
Step 1:
Place the table top (#1) onto a non-abrasive
surface, such as a carpet, with its underside facing
up. Insert the legs (#2) into the plastic holders
attached on the table top (#1) rim. See Figure 1.
You will need the following tools:
- Phillips Screwdriver (Not Included)
- Hex. Key Wrench (See Part #6)
- Hex. Key Wrench (See Part #7)
HEX.KEY WRENCH 4MM
HEX.KEY WRENCH 10MM
BOLT M6*15
SCREW ST4.2*12
CENTER
CONNECTOR
LEG
TABLE TOP
17KAA0101----Y4
17C40A0705001YX
17C17A0403001YX
62TGS24SCY101
TGS24SC-CS02
TGS24SC-CS01
4
8
1
6
17KAC3101----Y3
1
7
5
1
4
1
4
3
2
Q’TY
1
MATERIAL CODE
PART
PART
NO.
PARTS LIST
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
TGS24SC
2
2
2
2
1
!
!
!
!
!
!
Use the correct bolts as indicated. Do not tighten any of the bolts until the table is completely
assembled.
Do not sit or stand on this table.
Do not discard of any of the packaging until you have checked that you have all of the parts
and fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed
by children. Children should always be under direct adult supervision while using this
product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
